SinusMax -Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
Check out this review video on the the 800 Va Phoenix inverter now
Download Datasheet for Phoenix inverter 180VA-1200VA 12V / 24V / 48V here
Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source.
Download Datasheet Here
An Autotransformer can be used for step up, step down and split phase output balancing purposes.
While the step up and step down functions are fairly straightforward, split phase output balancing may require some more attention.
The Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained – almost anywhere in the world – by accessing your Color Control GX using our free-to-use Victron Remote Management Portal (VRM).
The ECOmulti can be wall mounted, is easy to install, easy to program and easy to operate. With 2,3 kWh Li-ion storage capacity and a 3 kVA bidirectional inverter, the ECOmulti reduces dependence on power from the grid.
Lead Carbon Battery
Better partial state-of-charge performance, more cycles, and higher efficiency
Replacing the active material of the negative plate by a lead carbon composite potentially reduces sulfation and improves charge acceptance of the negative plate.
The advantages of lead carbon therefore are:
– Less sulfation in case of partial state-of-charge operation.
– Lower charge voltage and therefore higher efficiency and less corrosion of the positive plate.
– And the overall result is improved cycle life.
MultiPlus 500VA – 1600VA Inverter
Multifunctional
inverter/charger with GX inside
An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features – such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power – can all be controlled straight from your phone or smart device. Remote monitoring is also possible.
Bluetooth built-in: fully configurable with a tablet or smartphone
– Low battery voltage alarm
– Low battery voltage cut-off and restart levels
– Dynamic cut-off: load dependent cut-off level
– Output voltage: 210 – 245V
– Frequency: 50 Hz or 60 Hz
– ECO mode on/off and ECO mode sense level
– Alarm relay
Monitoring:
– In- and output voltage, load and alarms
Created with quality in mind, the Victron Energy Phoenix Inverter VE.Direct 250VA – 500VA range has a huge variety of applications. Victron has created a true sine-wave inverter with peak efficiency and great performance. A top-of-the-range product with a compact size, the Victron phoenix inverter is capable of supplying power, problem free, to any load.
This quality inverter comes with a VE.Direct interface port, allowing you to have even more control over your device. Just connect it up to a computer or Apple/Android mobile device to configure settings and receive updates that will help you run your system with ease and control.
The Victron Energy Venus GX provides intuitive control and monitoring. It has the same functionality as the Color Control GX, with a few extras:
– lower cost, mainly because it has no display or buttons
– 3 tank sender inputs
– 2 temperature inputs