The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable.
- Lighting control function, fully programmable.
- Three stage battery charging (bulk, absorption, float), fully programmable.
- Integrated battery monitor function (Remote Panel needed to display state of charge).
- Load output with low voltage disconnect and manual control (default setting).
- Optional external temperature sensor.
- Load output protected against over load and short circuit.
- Protected against reverse polarity connection of the solar panels and/or battery.
BlueSolar PWM Light Charge Controllers-12-24V-EN Datasheet
BlueSolar PWM DUO Charge Controller EN Datasheet
Datasheet BlueSolar PWM Light Charge Controllers 48V EN
Datasheet BlueSolar PWM Pro Charge Controllers EN
SinusMax -Superior engineering Developed for professional duty, the Phoenix range of inverters is suitable for the widest range of applications. The design criteria have been to produce a true sine wave inverter with optimized efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and capable of supplying power, problem-free, to any load.
Check out this review video on the the 800 Va Phoenix inverter now
Download Datasheet for Phoenix inverter 180VA-1200VA 12V / 24V / 48V here
Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source.
Download Datasheet Here
12,8V & 25,6V Lithium SuperPack
Integrated BMS and safety switch
The SuperPack batteries are extremely easy to install, not needing any additional components.
The internal switch will disconnect the battery in case of over discharge, over charge or high temperature.
The batteries can be connected in parallel. Series connection is not allowed.
12 / 24 / 36 / 48 Volt
- Victron Energy BlueSolar Charge Controller MPPT 150/70 and MPPT 150/85
- Charge current up to 70A and 85A, and PV voltage up to 150V: automatically adjust to a 12, 24 or 48V nominal battery voltage
- Ultra-fast Maximum Power Point Tracking (MPPT)
- Advanced Maximum Power Point Detection in case of partial shading conditions.
The Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained – almost anywhere in the world – by accessing your Color Control GX using our free-to-use Victron Remote Management Portal (VRM).
All-in-one solar power solution
The Victron Energy EasySolar inverter combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.
Victron Energy EasySolar inverter , an integrated smart total power solution, new BlueSolar models, the latest ultrafast MPPT charge controllers, ECOmulti, a simple wall mounted energy storage solution that also can function as a UPS, several assistants to support hub-systems plus new functionality in the VRM portal. Ease of use is key to all our products, which have been developed to improve energy management and facilitate a stable electricity supply in all possible locations with the maximum return on investment. EasySolar All that is needed to reap the full benefit of solar energy is EasySolar, some solar panels and batteries.
Victron Energy EasySolar inverter takes power solutions one stage further; by combining an Ultra-fast BlueSolar charge controller (MPPT), an inverter/charger and AC distribution all in one enclosure. BlueSolar charge controller (MPPT) Ultra-fast BlueSolar charge controllers improve the energy harvest significantly. Victron Energy expands its product series with several new models. The MPPT 150/70 for example, delivers a charge current up to 70A and PV Voltage up to 150V. The 48v model also comes with an inbuilt Color Control GX. These new Easysolar models are now available in both Accra and Tema Nocheski storefronts.
Download EasySolar 3000Va datasheets here
The ECOmulti can be wall mounted, is easy to install, easy to program and easy to operate. With 2,3 kWh Li-ion storage capacity and a 3 kVA bidirectional inverter, the ECOmulti reduces dependence on power from the grid.
MultiPlus 500VA – 1600VA Inverter
Multifunctional
inverter/charger with GX inside
An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features – such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power – can all be controlled straight from your phone or smart device. Remote monitoring is also possible.
Bluetooth built-in: fully configurable with a tablet or smartphone
– Low battery voltage alarm
– Low battery voltage cut-off and restart levels
– Dynamic cut-off: load dependent cut-off level
– Output voltage: 210 – 245V
– Frequency: 50 Hz or 60 Hz
– ECO mode on/off and ECO mode sense level
– Alarm relay
Monitoring:
– In- and output voltage, load and alarms
The Victron Energy Venus GX provides intuitive control and monitoring. It has the same functionality as the Color Control GX, with a few extras:
– lower cost, mainly because it has no display or buttons
– 3 tank sender inputs
– 2 temperature inputs