Description
The Cyrix-i 12/24-120 is a bidirectional voltage sensitive relay. It will therefore also engage if for example the accessory battery is being charged by a battery charger.
Emergency parallel feature
Easy to install
The Cyrix Battery Combiner is a microprocessor controlled heavy duty relay that automatically connects batteries in parallel when one of them has reached a pre-set voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or more batteries are being discharged). Cyrix Battery Combiners are an excellent replacement for diode isolators. The main feature is that there is virtually no voltage loss so that the output voltage of alternators or battery chargers does not need to be increased.
Only logged in customers who have purchased this product may leave a review.
The Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained - almost anywhere in the world - by accessing your Color Control GX using our free-to-use Victron Remote Management Portal (VRM). Datasheet download
The Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all…
THE COMPACT PROJECT INVERTER FOR MAXIMUM YIELDS. The three-phase Fronius Eco in power categories 25.0 and 27.0 kW perfectly meets all the requirements of large-scale installations. Thanks to its light weight and SnapINverter mounting system, this transformerless device can be installed quickly and easily either indoors or outdoors. This inverter series sets new standards with…
THE COMPACT PROJECT INVERTER FOR MAXIMUM YIELDS. The three-phase Fronius Eco in power categories 25.0 and 27.0 kW perfectly meets…
The CANvu GX is a product in the Victron GX Product Family. It’s so convenient to be able access all your system information via touch screen – and because the CANvu GX is a sealed-unit, you can install it in some challenging environments! The IP67 rating of the CANvu GX means that it is completely protected against…
The CANvu GX is a product in the Victron GX Product Family. It’s so convenient to be able access all…
12 / 24 / 36 / 48 Volt Solar charge controllers Victron Energy BlueSolar Charge Controller MPPT 150/70 and MPPT 150/85 Charge current up to 70A and 85A, and PV voltage up to 150V: automatically adjust to a 12, 24 or 48V nominal battery voltage Ultra-fast Maximum Power Point Tracking (MPPT) Advanced Maximum Power…
12 / 24 / 36 / 48 Volt Solar charge controllers Victron Energy BlueSolar Charge Controller MPPT 150/70 and…
This Off-Grid solar inverters is very popular choice within the Accra-tema metroplolis and other regions such as Ashanti,Brong Ahafo and Northen regions of Ghana. It has a Pure sine wave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds.5 year warranty assured datasheeet download
This Off-Grid solar inverters is very popular choice within the Accra-tema metroplolis and other regions such as Ashanti,Brong Ahafo and…
The communicative inverter for optimised energy management. The Fronius Primo in power categories from 3.0 to 8.2 kW perfectly completes the new SnapINverter generation. This single-phase, transformerless device is the ideal inverter for private households. Its innovative SuperFlex Design provides maximum flexibility in system design, while the SnapINverter mounting system makes installation and maintenance easier…
The communicative inverter for optimised energy management. The Fronius Primo in power categories from 3.0 to 8.2 kW perfectly completes…
Bluetooth built-in: fully configurable with a tablet or smartphone - Low battery voltage alarm - Low battery voltage cut-off and restart levels - Dynamic cut-off: load dependent cut-off level - Output voltage: 210 - 245V - Frequency: 50 Hz or 60 Hz - ECO mode on/off and ECO mode sense level - Alarm relay Monitoring:…
Bluetooth built-in: fully configurable with a tablet or smartphone - Low battery voltage alarm - Low battery voltage cut-off and…
12,8V & 25,6V Lithium SuperPack Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, not needing any additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed.
12,8V & 25,6V Lithium SuperPack Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, not needing…
With power categories ranging from 3.0 to 20.0 kW, the transformerless Fronius Symo is the three-phase inverter for every system size. Owing to the SuperFlex Design, the Fronius Symo is the perfect answer to irregularly shaped or different roof orientations. A WLAN or Ethernet internet connection as standard plus easy integration of third-party components make the…
With power categories ranging from 3.0 to 20.0 kW, the transformerless Fronius Symo is the three-phase inverter for every system size.…
SmartSolar MPPT 250/60 up to 250/100 Solar charge controller A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. Models:250/60, 250/70, 250/85…
SmartSolar MPPT 250/60 up to 250/100 Solar charge controller A solar charger gathers energy from your solar panels, and stores…
The Victron Energy Venus GX provides intuitive control and monitoring. It has the same functionality as the Color Control GX, with a few extras: - lower cost, mainly because it has no display or buttons - 3 tank sender inputs - 2 temperature inputs
The Victron Energy Venus GX provides intuitive control and monitoring. It has the same functionality as the Color Control GX, with…
The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable. Lighting control function, fully programmable. Three stage battery charging (bulk, absorption, float), fully programmable. Integrated battery monitor function (Remote Panel needed to display state of charge). Load output with low voltage disconnect and manual control (default setting). Optional…
The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable. Lighting control function,…
Select at least 2 products
to compare

Reviews
There are no reviews yet.