> Single-phase, split-phase and three-phase installations > Installation without cutting off the mains power supply > Bluetooth, Ethernet and USB Communication > Automatic recognition of the sensors connected > Recording on SD card
Two AC inputs with integrated transfer switch The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. Download Datasheet Here
The Victron Blue Power battery charger is a standalone charger which is directly connected to the national grid used to recharge deep cycle batteries when drained. The Blue power charger regularly checks the state of charge, voltage and reconditions the battery when in an unfavourable condition. The Victron Battery chargers include blue power IP 20/…
Bluetooth inside (dongle not needed) Optional LCD display VE.Direct communication port Available with screw terminals or MC4 (solar) terminals Datasheet download
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximizes this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. The VE.Can feature is the ideal solution for synchronized parallel operation of up to 25 controllers. Models:12/24/36/48 Volt Datasheet…
CA 1227 Reference P01654227 Air speed/ flow-rate sensor Vane with optical detection Air speed range 0.25 m/s to 35.0 m/s (49.0 to 6890.0 fpm) Air speed accuracy ± 3 % of reading ± 4 cts Air flow-rate range 0 to 2,999 m3/h Air flow-rate accuracy ± 8 % of reading Temp. range °C/°F - 20…
CA 1246 Reference P01654246 Relative Humidity range 3.0 to 98.0 %RH Relative Humidity accuracy 10 to 90 %RH: ± (2 %RH ± 1 ct) outside that range: ± (4 %RH ± 1 ct) Temperature range - 10.0 to +60.0°C Temperature accuracy 10 to 40°C: ± (0.5°C ± 1 ct) outside that range: ± (0.032 x…
Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data. The dongle is able to read data from the BMV-70x series battery monitors, Phoenix Inverters with…
The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries. When the charge voltage of a 24V battery system increases to more than 27V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery…
12,8V & 25,6V Lithium SuperPack Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, not needing any additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed.
A truly innovative battery These Victron Energy AGM Super Cycle batteries are the result of recent battery electro chemistry developments. The paste of the positive plates is less sensitive to softening, even in case of repeated 100% discharge of the battery, and new additives to the electrolyte reduce sulfation in case of deep discharge. Why…
Designed for telecom applications; excellent “floor space savers” for marine and vehicle applications The deep cycle AGM telecom series has been designed for use in telecom systems. With front access terminals and small footprint, the batteries are ideal for racked systems. Similarly, these batteries can help solve limited floor space and access problems on board…
