12 / 24 Volt Solar charge controllers Bluetooth enabled (Bluetooth dongle needed) Ultra-fast Maximum Power Point Tracking (MPPT) Advanced Maximum Power Point Detection in case of partial shading conditions VE.Direct communication port download MPPT overview Datasheet download
The BlueSolar PWM-Pro series is ready for use with its default settings. It also is fully programmable. Lighting control function, fully programmable. Three stage battery charging (bulk, absorption, float), fully programmable. Integrated battery monitor function (Remote Panel needed to display state of charge). Load output with low voltage disconnect and manual control (default setting). Optional…
The CANvu GX is a product in the Victron GX Product Family. It’s so convenient to be able access all your system information via touch screen – and because the CANvu GX is a sealed-unit, you can install it in some challenging environments! The IP67 rating of the CANvu GX means that it is completely protected against…
The MPPT Control lets you see the status as well as setup all BlueSolar MPPT Charge Controllers that have a VE.Direct communications port. The new MPPT Control is mounted in the familiar BMV-700 series housing, maintaining a consistent and professional look to your panels and systems monitoring equipment. To easily mount the MPPT Control on…
The Victron Blue Power battery charger is a standalone charger which is directly connected to the national grid used to recharge deep cycle batteries when drained. The Blue power charger regularly checks the state of charge, voltage and reconditions the battery when in an unfavourable condition. The Victron Battery chargers include blue power IP 20/…
Bluetooth inside (dongle not needed) Optional LCD display VE.Direct communication port Available with screw terminals or MC4 (solar) terminals Datasheet download
Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data. The dongle is able to read data from the BMV-70x series battery monitors, Phoenix Inverters with…
The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries. When the charge voltage of a 24V battery system increases to more than 27V, the Battery Balancer will turn on and compare the voltage over the two series connected batteries. The Battery…
12 / 24 / 36 / 48 Volt Solar charge controllers Victron Energy BlueSolar Charge Controller MPPT 150/70 and MPPT 150/85 Charge current up to 70A and 85A, and PV voltage up to 150V: automatically adjust to a 12, 24 or 48V nominal battery voltage Ultra-fast Maximum Power Point Tracking (MPPT) Advanced Maximum Power…
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life. Models:75/10, 75/15 & 100/15 (12/24V) Bluetooth enabled (Bluetooth dongle needed) Day/night timing…
The BMV-700 is our newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery. https://www.youtube.com/watch?v=tO_rumFbgVU Datasheet-BMV-700-series-EN VictronConnect-BMV-app Discovery Sheet
The Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained - almost anywhere in the world - by accessing your Color Control GX using our free-to-use Victron Remote Management Portal (VRM). Datasheet download
All-in-one solar power solution The Victron Energy EasySolar inverter combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. Victron Energy EasySolar inverter , an integrated smart total power solution, new BlueSolar models, the latest ultrafast MPPT charge controllers, ECOmulti, a simple…
All-in-one solar power solution The Victron Energy EasySolar inverter combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution…
The Victron Energy Octo GX is the communication-centre of your installation. It connects the components together and ensures they are working in harmony. Monitoring of live data, and changing settings is performed by using your smartphone (or other device) via our free-to-use Victron Remote Management Portal, VRM. The Victron Energy Octo GX is a member of the GX Product…
Voltage and Temperature sense The Victron Energy Smart Battery Sense is a wireless battery voltage and temperature sensor for Victron MPPT Solar Chargers. With voltage and temperature sense in place, batteries will be better charged; improving charging-efficiency and prolonging battery life.Both for lead, and for lithium batteries.
SmartSolar MPPT 250/60 up to 250/100 Solar charge controller A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. Models:250/60, 250/70, 250/85…
