Description
pH Temperature
Reference P01710015
Measurement range 0.00 – 14.00 pH 0,0 – 60.0 °C
32.0 – 140.0 °F
Resolution 0.01 pH 0.1 °C / 0.1 °F
Error ± 0.1 pH ± 1 °C / ± 2 °F
Calibration Automatic; 1, 2 or 3 points ; stored buffers
Interchangeable electrode No
Power supply /Life span 2 x CR2032 3V batteries / >100 hours
Auto power-off After 20 min without activity
Dimensions/weight 227 x 36 x 20 mm / 65 g
Environment
Operating range / 0 to +50°C, max. Relative
80%
Storage range -10 to +50°C, max. Relative
Humidity 90%
> Automatic, extremely easy calibration at
3 points: saves time!
> Detection of temperature-compensated pH values (ATC)
°C °F
IP
67 TDS Resistivity
Salinity
Conductivity
CA 10141
Reference P01710020
Measurement range (instr. alone) 0,050 μS/cm to 500,0 mS/cm
Resolution (R)
Intrinsic uncertainty (instr. alone)
0.001 to 0.1 (depending on range)
± 0.5% ± R
TDS
Measurement range (instr. alone) 0.001 mg/l to 499,9 g/l
Resolution (R)
Intrinsic uncertainty (instr. alone)
0.001 to 0.1 (depending on range)
± 0.5% ± R
Resistivity
Measurement range (instr.alone) 2.000 Ω.cm to 19.99 MΩ.cm
Resolution (R)
Intrinsic uncertainty (instr. alone)
0.001 to 0.01 (depending on range)
± 0.5% ± R
Salinity
Measurement range (instr. alone) 2.0 to 42.0 psu
Resolution (R)
Intrinsic uncertainty (instr. alone)
0.1
± 0.5% ± R
Temperature
Measurement range (instr. alone) – 10 to + 120°C (14 to 248°F)
Resolution (R) 0.1 °C (0.1°F)
Intrinsic uncertainty (instr. alone) < 0.4°C (<0.7°F)
Available reference temperature 20/25 °C (68/77°F)
Calibration
1 point, 6 predefined conductivity reference
standards (user-modifiable); Possibility of
resetting to default calibration
Temperature compensation
Temperature compensation mode Automatic (ATC) or manual (MTC) linear,
non-linear
Conductivity sensor
Type
XCP4ST1 (supplied), 4-pole conductivity
sensor with built-in temperature sensor
(Pt 1000)
Connector 8-pin DIN, 1 m cable
Data storage
Memory > 100,000 measurements
Sensor input 8-pin DIN (adapters for BNC, S7 and Jack
available as an option)
Communication interface Type B micro-USB (USB device), 12 Mbit/s
Power supply
Number – Type 4 x 1.5 V AA or LR06 alkaline batteries
Auto power-off After 3, 10 or 15 min without use (adjustable)
Protection rating IP67
Dimensions (with sheath) 211 x 127 x 54 mm
Weight (without sensor) 600 g
Accessories
pH 4.01 buffer solution (NIST)*, 125 mL…………………………P01700106
pH 7.00 buffer solution (NIST)*, 125 mL…………………………P01700107
pH 10.01 buffer solution (NIST)*, 125 mL……………………….P01700109
Set of 3 plastic beakers……………………………………………….P01710056
